Aquathin PEARL 30, Начало работы

Страница: 8 / 60

8 © 2009-2016 Aquathin Corporation. All rights reserved.
SETTING UP YOUR PEARL SYSTEM
Your Aquathin PEARL system requires adequate water
pressure. The PEARL operates at 24 volts, utilizing a
compact transformer that accommodates either 110 or
220 volts, so that you can take your system wherever you
move. This unit is designed to operate within a pressure
range of 40–100 PSI. The amount of purified water
produced depends primarily on your water pressure,
temperature, and the amount of Total Dissolved Solids
(TDS). Normal production averages up to 45 gallons (≈
170 liters) per day. If you plan to install this unit on a
private well system, you should check your water
pressure gauge. If the low pressure setting is less than 40
PSI, ask a plumber to adjust and raise the pressure to the
minimum level of 40 PSI. An optional booster pump
(PBA-G) is available when source pressure is
severally low. Installation to comply with state and local
laws and regulations.
IMPORTANT NOTE:
For private well owners we recommend that you choose
the Aquathin PEARL with PBA-G booster pump system
which includes a booster pump and is completely
configured at the factory. This eliminates fluctuations in
line or low pressure associated with private wells and
ensures your PEARL system operates at peak efficiency.
While 45PSI is enough to produce water with exceptional
purity required for passing Aquathin standards, you may
find water flow to the faucet is less than optimal, and that
your holding tank will not store much water. (The
amount of water stored is a function of line pressure).