Aquathin PEARL 30, Начало работы

Страница: 15 / 60

15 © 2009-2016 Aquathin Corporation. All rights reserved.
9. Connecting Tubing to John Guest Speedfit®
Fittings
Aquathin systems make extensive use of John Guest
Speedfit® fittings. These high quality components
provide secure, leak free seals and make it easy to
connect and disconnect tubing without the use of tools.
Refer to
diagrams on page 48, Appendix C2 .
10. Connect Cold Water Supply Line
Measure and cut a
length of tubing to
connect the feed water
saddle valve to the left
inlet on the frame
assembly (indicated
by “TO FEED”).
Connect the tubing to
the saddle valve using
the
co mp r essio n
fittings provided. ( See
f i g u r e 9 a n d
installation diagram
on page 49.
)
Cut tubing so the end
is square to ensure a
leak free seal. Cut
tubing with a fresh,
sharp blade and a
slicing
motion to
avoid crimping. See
figure 10 on the right .
Figure 9. Connect tubing as
shown (color coding of tubing is
for installation purposes)
Figure 10. Cut tubing square;
do not use scissors