Aquathin PEARL 30, Начало работы

Страница: 17 / 60

17 © 2009-2016 Aquathin Corporation. All rights reserved.
13. Prepare Storage Tank
Remove the plug
on top of the
storage
tank,
revealing an inlet.
Wrap Teflon pipe
tape
on the
threads of the
storage tank inlet;
then place three
(3)
drops of
regular household
chlorine
bleach
into the opening.
Attach the tank
ball valve as shown in the
figure above . Close valve to
prevent chlorine from escaping.
Close the tank ball valve by turning the blue handle
perpendicular to the valve body; then screw the valve
onto the storage tank until firm. DO NOT OVER-
TIGHTEN. Determine the position for the storage tank
beneath the sink. If space is at a premium, it is OK to lay
the tank on its side. A stand is included.
14. Connect Main
Assembly to Storage
Tank
With the tank in position,
measure and cut a length of
tubing to connect the inlet
of the main assembly
indicated by “TO TANK”
and the “T” connector on
the tank ball valve. (
See
figure 13. )
Figure 12. Storage tank preparation
Figure 13. Main assembly
to storage tank (color of
tubing is for illustrative
purposes)