Aquathin PEARL 30, Начало работы

Страница: 14 / 60

14 © 2009-2016 Aquathin Corporation. All rights reserved.
NOTE: Do not hang the assembly until tubing
connections have been made (following pages.)
8. Making the Tubing Connections
You have completed the bulk of the installation tasks. All
that remains is connecting tubing between the
components.
The tubing is to be used to:
 Connect the feed water saddle valve to the inlet on
the main assembly (indicated by “TO FEED”)
 Connect the Drain Saddle Valve Assembly to the
inlet on the main assembly frame (indicated by
“TO DRAIN”)
 Connect the tank to the inlet on the main assembly
(indicated by “TO TANK”) and as well to connect
the tank to the faucet through the GAC post filter
(CARB 6).
NOTE: It is important to correctly measure the required
length of the tubing for each connection prior to cutting
the tubing. Additional yellow and red tubing are provided
if you opted for the pump (PBA-G).
Figure 8. Spacing between keyholes (figure not drawn
to scale)