Aquathin AquaKING RO, Руководство пользователя

Страница: 39 / 52

39 © 2009 Aquathin Corporation. All rights reserved.
Q:
How long does it take to make a tank of water?
A:
The rate your system produces water is dependent
upon several factors including source water pressure,
temperature, and the amount of total dissolved solids
(TDS). We rate our membranes very conservatively, and
the AquaKING Series comes with a 45 gallon per day
membrane, meaning water production will normally be
1.5 – 2 gallons per hour.
Q:
When I put my system into flush mode, it makes
noise. Is this normal?
A:
When your system is flushing, water is flowing to the
drain much faster than normal production mode. The
check valve will sometimes chatter with the increased
flow, and this can be heard as a hum or rattle. When your
system is first put in service, there may be air in the lines
that can also cause noise from the system. After a few
days the noise typically will go away.
You might also notice that your system will seem to start
and stop (chug) when you open the flush valve. If this
happens, simply open the valve a little less than fully
open so some pressure is still showing on the gauge.
Q:
How can I keep informed about Aquathin?
A:
“Splash News Bulletin”, “Forum Q&A”, “Allergic
Reaction”, “Biz Bank”, “Tech Bank”, and “Quote Bank”
are all
FREE
services to all Authorized Aquathin Dealers
and their Customers to keep you abreast of technology
updates and industry news.
Email Aquathin at info@aquathin.com to subscribe.
Visit www.aquathin.com .