Aquathin AquaKING RO, Руководство пользователя, Страница: 14 / 52

14 © 2009 Aquathin Corporation. All rights reserved.
It is best to have the anodized aluminum frame placed
above the plane of the drain saddle valve whenever
possible. When this is not possible, extra care must be
taken when routing tubing from the assembly to the drain
saddle valve. (See Figure 8, above.)
Before proceeding, make sure the three pre-filter
canisters are firmly attached.
Mounting the Deionization Module (If purchased
as DIMS VS AK 40 DI complete)
The Aquathin 4 stage Deionization (DI) module can be
placed anywhere convenient inside the cabinet. Keep the
distance between the main assembly, storage tank, and DI
module as short as possible. The DI module can be
mounted horizontally (preferred) or vertically. If mounted
vertically, the outlet should be at the bottom.
If frame is below plane of
drain saddle valve, drain
tubing should be looped as
high as possible beneath sink.
Figure 8, Drain Tubing Connection
Wrap threads of 90
quick-connect fitting
with Teflon thread tape.
Screw fitting into module
until finger tight
Teflon wraps around fitting in same direction screws
into place. Expose 1st thread. NEVER use pipedope.
Figure 9, Installation of 90° Speedfit Fittings into Deionization Module