Aquathin AquaKING RO Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 52

background image

32

© 2009 Aquathin Corporation. All rights reserved.

5. Open the Flush Valve (relieves pressure)

6. Place a towel beneath the pre-filter/RO assembly—it

will absorb the small amount of water that will spill
from the modules as they are changed out.

It is often helpful to have an empty 3-5 gallon bucket
nearby.

Replacing the Aquathin Sediment Pre-filter

The sediment pre-filter is in the canister on the left side
of the assembly, beneath the manual flush valve. The
sediment pre-filter will likely be distasteful looking—it is
common for sludge to form on the filter surface. After
one year, this sludge layer can be fairly thick. The good
news is, if the sediment filter and AquaKING did not
catch this “guck”, your body would!

a) Push the red button (on the top of the aluminum

frame, above the pre-filter canister) to reduce any
back pressure remaining in the canister.

b) Firmly grasp the canister with both hands and

unscrew it from the pre-filter assembly. (A canister
wrench is available.) Carefully move the canister
over the bucket, dump the water, and remove the old
pre-filter.

c) Using a long handled, soft bristle brush, scrub the

inside of the canister with a mild dish washing
detergent and rinse.

d) Place the new pre-filter into the canister, and then

carefully re-attach the canister to the assembly.
Tighten until firm.

Replacing the Aquathin GAC Pre-filters

The twin unidirectional, GAC pre-filters are in the middle
canister and the canister on the right. Follow the same
procedure as described for replacing the sediment pre-
filter (above).

«
...
30
31
32
33
34
...
»

Содержание AquaKING RO





















































Отзывы:

Нет отзывов

Похожие инструкции для AquaKING RO

Бренд: WaterLogic Страницы: 6

Бренд: Micronfilter Страницы: 23

Бренд: Atlas Copco Страницы: 116

BioTec ScreenMatic 2

Бренд: Oase Страницы: 68

CircuPool RJ-G Series

Бренд: Compu Pool Products Страницы: 2

Бренд: Pacific Sun Страницы: 23

Бренд: Ultra Reef Страницы: 8

Бренд: Oase Страницы: 12

Бренд: BLUE COLLECTION Страницы: 10

Бренд: Fumex Страницы: 2

300-H-4510-BG-222-KIT

Бренд: US Water Systems Страницы: 17

INSTALL-OF-SPECIALTY-SYSTEM

Бренд: Kenmore Страницы: 18

Бренд: Kenmore Страницы: 12

Бренд: Kenmore Страницы: 28

Бренд: Kenmore Страницы: 20

Бренд: Kenmore Страницы: 68

Бренд: Kenmore Страницы: 26

Бренд: Kenmore Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды