Aquathin AquaKING RO Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 52

Aquathin AquaKING RO Скачать руководство пользователя страница 34

34

© 2009 Aquathin Corporation. All rights reserved.

Alternate disinfection procedure:

a) Disconnect the tubing from the “T” connector on the

tank ball valve and remove the storage tank from
beneath the sink.

b) Wrap a towel around the ball valve and slowly

unscrew the valve from the storage tank. There is
always some water remaining in the tank and this
will escape when the valve is removed. After setting
the valve aside, place the towel over the tank
opening and shake and rotate the tank to remove any
remaining water.

c) Re-wrap the threads with Teflon® pipe tape.

d) Now place a few drops of liquid chlorine bleach into
the top of the tank and re-install the tank ball valve (with
the valve in the closed position).

e) Reconnect the tubing to the swivel “T” connector.

Returning the AquaKING System to Service

To return your system to service:

1. Verify the manual flush valve is in the “Open -

Flush” position.

2. Open the valve on top of the storage tank.

3. Slowly re-open the cold water supply line. The pre-

filter canisters should begin to fill.

4. After ten (10) minutes, move the manual flush valve

to the “Closed - Production” position.

5. Check for leaks around the tops of the pre-filter

canisters. If water is seeping from any of the
canisters turn the cold water supply off, move the
manual flush valve to the “Flush” position, and then

«
...
32
33
34
35
36
...
»

Содержание AquaKING RO





















































Отзывы:

Нет отзывов