Wall mount drencher head installation
1
Prepare pipework from the shower valve to the required position for the fixed shower head using Ø15mm
copper pipe. Cut the outlet pipe to a finished length (55mm – 150mm measured from the finished wall
surface) using a rotary type cutter. If a hacksaw is used, the pipe end must be carefully de-burred and
chamfered.
2
Slide the wall spacer down the projecting pipe flush with the finished wall surface.
18
3
Ensure the pipe is clean and free of dust and slide the fixing bush which incorporates
the 15mm gripper ring down the projecting pipe flush with the wall spacer.
4
Carefully remove the fixed head arm and drill and prepare the fixings using the fixings provided, if suitable,
taking care to avoid pipework hidden in the wall.
5
Ensuring the fixing bush is clean and free of dust, fit the 15mm O-ring against the
end of the fixing bush. Lubricate the O-ring using a suitable silicone based lubricant.
!
The O-ring must be positioned on the 15mm pipe flush to the fixing bush, not
onto the fixing bush shaft.
6
Refit the shower arm and secure it to the wall using the screws provided.
