(2) 1/4-20" SST U-bolt
(4) 1/4" flat washer, lock washer, nut
(4) 1/4-20 nylon stop nut SST
(4) 5/16-18 bolt, flat washer, lockwasher, nut
(1) motor shaft key
(6) wire tie
►
Level
►
7/16" wrenches
►
1/2" wrenches
►
1/8" T-handle allen wrench
►
5/32" allen wrench
4
P
REPARATION
H
ARDWARE
C
HECKLIST
T
OOLS
R
EQUIRED
U
NPACKING
P
RE
-I
NSTALLATION
Detach housing assembly by using the 5/32" allen
wrench to remove the six cap screws securing the
housing assembly to the framework assembly.
(See
Fig. 1
)
Store hardware in safe location for later use.
After unpacking the unit, inspect for any damage
that may have occured during transit. Make sure to
tighten fittings, bolts, etc., before operation.
DO NOT OPERATE UNIT IF
DAMAGED DURING SHIPPING,
HANDLING OR USE. DAMAGE MAY RESULT IN BREAKAGE
AND CAUSE INJURY OR PROPERTY DAMAGE.
WARNING
Fig. 1
Housing
Assembly
Framework
Assembly
1/4-20 x 3/8" button
head cap screw
(54)
REMOVING
Housing Assembly
◄
WARNING
