GT
8
P
IVOT
A
DJUSTMENT
After securing the the GT 500-HS, a pivot adjustment
can be made to direct the fogging output to a desired
location.
This unit has a positive pivot locking system with four
available positions.
~
5º up
~
Horizional
~
7º down
~
14º down
To Make an Adjustment
Relieve the weight of the unit and lift one pivot lock
up and rest it in the middle of the "M". While securely
supporting the unit, lift the second lock up.
Adjust unit to desired angle. Re-engage both locks
into the closest available slot.
NOTE:
Use both sides of the "M" to access all four
pivot angles.
Pivot Locking System
Pivot
Lock
Mot
or's po
wer cord
Water line
Wire tie
Plug into a
Control Panel
or
Plug into 60Hz
electrical outlet
U
TILITIES
Universal plug
adapter required for
50Hz
power connection
Pivot
Point
Water
- Connect to an ordinary water supply with 20
PSI to 85 PSI:
•Directly to a garden hose
•Plumb into a water supply source
Drainage
- Any waste water from the fan housing is
directed into the unit's sump tank to be recycled.
Power
- Connect to an ordinary power supply:
•Directly to a receptacle for manual operation
•To a controller for automation
W-2
AQUA
FOG
www.JigglyGreenhouse.com | (800) 878-7829 | [email protected]
