VISION
13.3.
13.3.
13.3.
13.3. Alarm clock (devices with integrated RGB LED only)
Alarm clock (devices with integrated RGB LED only)
Alarm clock (devices with integrated RGB LED only)
Alarm clock (devices with integrated RGB LED only)
The VISION module can be used as an optical alarm clock. Time, days, colors
and duration can be configured. Please note that the VISION module does not
contain a buffered real time clock, so the clock is reset if power supply to the de-
vice is interrupted.
14.
14.
14.
14. Alarm configuration
Alarm configuration
Alarm configuration
Alarm configuration
aquasuite: Select “Alarms” from the device list below the “VISION” entry.
Device menu: Select “Alarms” from the menu list and confirm by pressing the right
arrow key.
14.1.
14.1.
14.1.
14.1. Alarm reporting and alarm limits
Alarm reporting and alarm limits
Alarm reporting and alarm limits
Alarm reporting and alarm limits
Select the data sources to be monitored and set appropriate alarm limits. If the
current reading is below the limit (flow sensors) or higher than the limit (tempera-
ture sensors), an alarm will be raised if the check box “Activate alarm evaluation”
is set for this value.
While an alarm condition is detected, the device display will permanently show a
corresponding information screen. If more than one alarm is active, the displayed
information will alternate between corresponding screens in short order.
On the alarm page within the aquasuite, all sources that currently raise an alarm
are highlighted with a red background color. Alarms that have been active at least
once since device start-up, but are not active presently, are highlighted with a yel-
low background color.
Make sure only to use readings for alarm evaluation that are functional with your
specific setup.
15.
15.
15.
15. System settings VISION
System settings VISION
System settings VISION
System settings VISION
aquasuite: Select “System” from the device list below the “VISION” entry.
Device menu: Select “System” from the menu list and confirm by pressing the right
arrow key.
15.1.
15.1.
15.1.
15.1. Device information
Device information
Device information
Device information
The details displayed here might be required when you contact our service for sup-
port.
15.2.
15.2.
15.2.
15.2. Factory defaults
Factory defaults
Factory defaults
Factory defaults
Click the button “Reset device to factory defaults” in the aquasuite or select the
“Factory defaults” entry from the menu for a complete reset of all settings. You will
have to completely reconfigure the device after resetting it to factory defaults!
© 2016
Aqua Computer GmbH & Co. KG
- 19 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
Содержание VISION
Страница 5: ......
