VISION
By clicking the plus symbol labeled “Data source”, one of the provided sensors
can be assigned to the selected software sensor.
Transmission of sensor data via aquabus interface
Sensor data to be transmitted via aquabus are determined solely by the aquaero
5/6 controller connected to the VISION module. For configuration, the aquaero
has to be connected to the PC (at least temporarily) via USB.
Select “aquabus” from the device list below the “aquaero” entry. From the “Cur-
rently connected aquabus devices” section, select the appropriate VISION module
to receive sensor data. Up to four sensors can be selected to be transmitted to the
VISION module as well as the sensor number to used.
10.
10.
10.
10. Display configuration
Display configuration
Display configuration
Display configuration
aquasuite: Select “Display” from the device list below the “VISION” entry. In the
upper area, the twelve configurable display screens are displayed. In the lower
area, the selected screen can be configured.
Device menu: Select “Display” from the menu list and confirm by pressing the right
arrow key.
10.1.
10.1.
10.1.
10.1. General display settings
General display settings
General display settings
General display settings
Display brightness and automatic change of the displayed screen can be config-
ured.
10.2.
10.2.
10.2.
10.2. Display screens
Display screens
Display screens
Display screens
for display mode, twelve configurable screens are available. For each screen, one
of the versatile template can be selected and configured. Depending on the tem-
plate, data sources, texts and images can be configured.
10.3.
10.3.
10.3.
10.3. Key assignment (VISION Touch only)
Key assignment (VISION Touch only)
Key assignment (VISION Touch only)
Key assignment (VISION Touch only)
For each screen, all four keys can be assigned individually.
In particular, it is possible to configure a screen that is only displayed during
standby and configure an USB keyboard command to wake up the PC when a key
of the VISION module is pressed. To do so, assign “User defined 12” to the key,
click the “Edit” button and select “Power (system)” for this key. In a similar fashion,
you could use the up and down keys to adjust PC volume when the media player
screen is displayed. The template with four images can be used to assign individu-
al functions to each key and label them with custom made symbols – let your cre-
ativity run wild.
© 2016
Aqua Computer GmbH & Co. KG
- 15 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
Содержание VISION
Страница 5: ......
