VISION
11.
11.
11.
11. Infrared configuration (devices with IR receiver only)
Infrared configuration (devices with IR receiver only)
Infrared configuration (devices with IR receiver only)
Infrared configuration (devices with IR receiver only)
aquasuite: Select “Infrared” from the device list below the “VISION” entry.
Device menu: Select “Infrared” from the menu list and confirm by pressing the
right arrow key.
11.1.
11.1.
11.1.
11.1. General settings IR receiver
General settings IR receiver
General settings IR receiver
General settings IR receiver
The infrared receiver of the VISION module can be disabled completely.
If activated, processing of infrared codes sent by an aquaremote (53088, not in-
cluded in delivery) can be enabled and PC mouse and PC keyboard functionality
of the aquaremote may be configured. Keyboard events forwarded to the PC will
be processed by the PC according to the currently selected keyboard layout in the
operating system. The aquaero supports two different keyboard layouts for QWER-
TY and QWERTZ layouts.
The “IR priority” setting defines the default mode of operation of the aquaremote.
After approximately 10 seconds without IR activity, the mode is reset to the select-
ed mode.
11.2.
11.2.
11.2.
11.2. aquaremote multi device mode
aquaremote multi device mode
aquaremote multi device mode
aquaremote multi device mode
The multi device mode can be used to control up to ten VISION modules indepen-
dently using an aquaremote. Configure a unique key for each VISION module.
In order to control a specific VISION module with activated multi device mode,
press the desired mode key (
, or
TV
) followed by the configured unique key.
The selected VISION module will process all following infrared commands of the
aquaremote. After approximately 10 seconds without IR activity, the VISION mod-
ule automatically disables processing of IR commands again.
11.3.
11.3.
11.3.
11.3. User defined infrared commands
User defined infrared commands
User defined infrared commands
User defined infrared commands
The VISION module can execute up to ten user defined actions after receiving a
specific infrared code. The the actions can be triggered by pressing the “ASD-
FGHJKL ” keys of the aquaremote, additionally an infrared code from a multi-
tude of commercially available remote controls can be assigned to each action.
VISION specific functions as well as USB keyboard commands including media
and system keys may be assigned as actions.
11.4.
11.4.
11.4.
11.4. aquaremote: “VISION”, “Computer”, “Media” modes
aquaremote: “VISION”, “Computer”, “Media” modes
aquaremote: “VISION”, “Computer”, “Media” modes
aquaremote: “VISION”, “Computer”, “Media” modes
Processing of infrared commands received by the VISION module depends on cur-
rent mode of operation. Key assignment differs in the three modes of operation.
In “VISION” mode, all keys will be processed by the VISION module and not for-
warded to the PC. In “Computer” and “Media” mode, all keys will directly be for-
warded to the PC and not be processed by the VISION module.
- 16 -
Aqua Computer GmbH & Co. KG
© 2016
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
Содержание VISION
Страница 5: ......
