VISION
12.
12.
12.
12. LED configuration (devices with integrated RGB LED only)
LED configuration (devices with integrated RGB LED only)
LED configuration (devices with integrated RGB LED only)
LED configuration (devices with integrated RGB LED only)
aquasuite: Select “LED” from the device list below the “VISION” entry.
12.1.
12.1.
12.1.
12.1. LED mode
LED mode
LED mode
LED mode
The RGB illumination can either be controlled by a sensor input or be set to a fixed
color or a color gradient.
12.2.
12.2.
12.2.
12.2. Color settings
Color settings
Color settings
Color settings
Depending on the current mode, one or two colors can be defined. Colors can
conveniently be set using the graphical color and brightness selectors, alternatively
corresponding values can be set manually.
12.3.
12.3.
12.3.
12.3. Sensor controlled mode
Sensor controlled mode
Sensor controlled mode
Sensor controlled mode
In Sensor controlled mode, two colors can be defined corresponding to two sensor
readings (for instance temperatures). The VISION module generates a color gradi-
ent for sensor values between these limits.
13.
13.
13.
13. Time configuration
Time configuration
Time configuration
Time configuration
aquasuite: Select “Time settings” from the device list below the “VISION” entry.
Device menu: Select “System” from the menu list and confirm by pressing the right
arrow key. Proceed to select the “Time” menu entry.
13.1.
13.1.
13.1.
13.1. Time zone, daylight saving time, time format
Time zone, daylight saving time, time format
Time zone, daylight saving time, time format
Time zone, daylight saving time, time format
Adjust the time zone setting to reflect the deviation of the local time from UTC in
hours. You may also choose to use automatic daylight saving time adjustment and
your preferred time format.
13.2.
13.2.
13.2.
13.2. Timer
Timer
Timer
Timer
The VISION module can be used as a countdown timer. Actions may be triggered
when the timer is started or runs out.
Devices with integrated RGB LED only: The RGB LED can be configured to visual-
ize the current timer state. If activated, the LED will be white for the first 50 % of
the timer interval, followed by blue for another 25 % and green for the final 25 %.
The LED will then blink red for 15 seconds after the timer has run out before re-
turning to normal operation.
- 18 -
Aqua Computer GmbH & Co. KG
© 2016
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
Содержание VISION
Страница 5: ......
