31
16.4
PLATFORM KIT FOR THE TINED WEEDER
PRO
For easier maintenance of the pneumatic seeder PS 120 M1 - PS 500 M2,
a suitable platform kit is available as an accessory. Please note that it must
be mounted in compliance with the standards.
Order number:
07014-2-386: Platform kit for the Tined Weeder Pro
07014-2-387: Platform kit for the Tined Weeder Pro with chassis at the
rear
Figure 40
16.5
LINKAGE SENSOR TOP LINK ACCESSORIES KIT MX
In combination with a pneumatic seeder, this sensor can be used to
automatically stop the seeding shaft when lifting the implement at the
headlands.
Order number:
00410-2-169
Figure 41
16.6
GPSA SENSOR MOUNTING KIT
In combination with a pneumatic seeder, this sensor can be used for speed-
dependent seed application.
Order number:
06001-2-064
Figure 42
16.7
TINED WEEDER PRO WHEEL SENSOR MOUNTING KIT
In combination with a pneumatic seeder, this sensor can be used for speed-
dependent seed application or to stop the seeding shaft of a pneumatic
seeder when lifting the implement at the headlands.
Order number:
07000-2-059
Figure 43
