12
6.2
HAZARD LABELS
Caution, crushing area!
Never reach into the
crushing danger zone as
long as the parts can
still move!
7
OPERATING INSTRUCTIONS
7.1
MOUNTING ON THE TRACTOR
Under difficult operating conditions, additional wheel weights can be useful. Please also refer to the
operating manual from the tractor manufacturer.
The tractor should be equipped with sufficient ballast weight at the front to ensure the steering and braking
capacity. At least 20% of the empty vehicle weight is required on the front axle.
The lifting links must be adjusted to the same height on the left and on the right. The implement must be
mounted on the 3-point linkage of the tractor.
Mount the top link so that it slants down towards the tractor during operation. (Observe the specifications
from the tractor manufacturer).
To ensure correct connection of the hydraulic hoses for the tine pre-
tensioning, the hoses are labelled as follows:
1 red cable tie: return flow (A, -)
2 red cable ties: supply (B, +)
Figure 3
