10
When performing electrical welding work on the tractor and mounted implement, disconnect the cable
on the generator and the battery!
Spare parts must at least comply with the technical requirements specified by the implement
manufacturer! This is ensured with original parts!
Cleaning must be performed with water and/or compressed air. Cleaning must only be carried with the
implement lowered, shut down and secured to prevent it being switched on again.
5.6
TYRES
When working on the tyres, it must be ensured that the implement is safely parked and secured against
rolling away (wheel chocks).
The mounting of wheels and tyres requires sufficient knowledge and proper installation tools.
Repair work on the tyres may only be performed by specialists and with suitable installation tools.
Check the inflation pressure regularly. Observe the prescribed inflation pressure (2.1 bar)!
5.7
MOUNTED SEEDERS
When using a seeder, all of the specifications of the implement manufacturer must be observed.
The seeder can be easily reached with using a ladder and platform. They must be clean and dry during
use.
It is strictly forbidden to stand on the platform or its access ladder while driving.
When not in use, the ladder must be folded up and secured.
An ascent must be established conforming to the standards. This ascent is available from APV.
5.7.1
FILLING THE SEEDER
The seeder is filled using a supply vehicle.
The platform kit may not be used to fill the seeder or as a storage area for objects or seed.
When filling the seeder, never stand under a suspended load!
When driving up to the implement with seed, nobody may be standing on or around the implement.
During the loading procedure, avoid any contact with the treated seed and wear gloves, a dust mask
and safety glasses.
CAUTION!
Misprints, errors and omissions excepted.
