APV MDC, Перевод оригинального руководства по эксплуатации

Страница: 7 / 52

7
Quality for Professionals
5 Layout and mounting the implement
Layout and mode of operation
The multi-metering unit is a spreading and seeding unit with a capacity of 40/100
litres.
The seeding shaft is driven by a 12-V gear motor, which is regulated using the
control box. The speed of the seeding shaft can be comfortably adjusted using the
control box from the driver's seat. With the MDS version (with spreading plate),
the working width can also be adjusted from the driver's seat.
As an option, there is the possibility of adjusting the speed of the seeding shaft to the
speed of the tractor by using various speed sensors (available as an accessory).
Furthermore, tractor linkage sensors are also available as an option, which are
responsible for automatically switching on and off at the headland.
Power can be supplied to the control box either through the 3-pin standard socket or
optionally directly from the battery.
Mounting the implement
To mount the seeder on the soil tillage implement, use the
counter plate that is supplied as a standard, which can be
bolted onto the frame of various implements.
Counter plate for mounting
To attach the seeder, you should use at least 8 bolts with a diameter of 10 mm and
the required length to ensure secure and firm attachment of the implement.
Please note that that the MDS must be mounted at a height of more than 1.5 m
(delivery height of the spreading plate).
Fig.: 1
Fig.: 2
Fig.: 3