APV MDC, Перевод оригинального руководства по эксплуатации

Страница: 41 / 52

41
Quality for Professionals
11 Accessories
Fill level sensor
This sensor can be retrofitted on the MD.
However, a 5.2 control box is required.
It measures the fill level in the hopper and triggers an alarm
on the control box when the set level is undercut.
The sensitivity of the sensor can be adjusted for the
respective seed type. It is adjusted using the small slotted
screw at the rear of the sensor.
Connect the sensor cable according to the connection
diagram.
Scope of
delivery: 1 fill level sensor
1 assembly plate
4 bolts
5 nuts
Order number: Item no.: 11000-2-060
Cable extension 2 m (6-pin)
If the standard installed implement cable is too short
due to the length of the soil tillage implement or how
the implement is mounted, or if the cable cannot be
routed practically, this cable extension can be ordered
as an accessory.
Cable extension 5 m (6-pin)
If the standard installed implement cable is too
short due to the length of the soil tillage implement
or how the implement is mounted, or if the cable
cannot be routed practically, this cable extension
can be ordered as an accessory.
Scope of
delivery:
1 cable extension
Order number:
Item no.: 00410-2-148
Scope of
delivery:
1 cable extension
Order number: Item no.: 00410-2-149
INSERT IMAGE
Fig.: 44
Fig.: 45
Fig.: 43