APV GW 250 M1, Руководство по эксплуатации

Страница: 9 / 24

9

When performing maintenance on the lifted implement, always ensure safety through suitable
support elements!

When changing work tools with sharp edges, always use suitable tools and gloves!

Dispose of oils, greases and filters according to the national regulations!

Always cut the power supply when working on the electrical system!

When performing electrical welding work on the tractor and mounted implement, disconnect the
cable on the generator and the battery!

Spare parts must at least comply with the technical requirements specified by the implement
manufacturer! This is ensured with original parts!

Cleaning must be performed with water or compressed air. Cleaning must be carried with the
implement lowered, shut down and secured to prevent it being switched on again.
5.5 MOUNTED SEEDERS

When using a seeder, all of the specifications of the implement manufacturer must be observed.

The seeder can be easily reached with using a ladder and platform. They must be clean and dry
during use.

It is strictly forbidden to stand on the platform or its access ladder while driving.

When not in use, the ladder must be folded up and secured.

An ascent must be established conforming to the standards. This ascent is available from APV.
5.5.1 FILLING THE SEEDER

The seeder is filled using a supply vehicle.

The platform kit may not be used to fill the seeder or as a storage area for objects or seed. When
filling the seeder, never stand under a suspended load!

When driving up to the implement with seed, nobody may be standing on or around the
implement.

During the loading procedure, avoid any contact with the treated seed and wear gloves, a dust
mask and safety glasses.
CAUTION!
Misprints, errors and omissions excepted!
6 INFORMATION SIGNS / HAZARD LABELS
Pay special attention to these stickers on the implement, as they warn you of specific dangers!
6.1 INFORMATION SIGNS
Read and observe the
operating manual
before operating the
implement!
Do not stand on the
implement while driving!
Loading hooks.
When loading the
implement, attach the
ropes or chains to these
points!
After a short period of
operation, re-tighten all
bolts and nuts.