APV GW 250 M1, Руководство по эксплуатации

Страница: 15 / 24

15
Now enter the calculated actual front axle load and the permissible front axle load
specified in the tractor operating manual in the table under Point 11.4.
4. Calculation of the actual total weight Gtat:
If the required minimum rear ballast (GH) is not reached with the rear-mounted implement (GH min),
the weight of the rear-mounted implement must be increased to the weight of the minimum rear
ballast!
Now enter the calculated total weight and the permissible total weight specified in the tractor
operating manual in the table under Point 11.4.
5. Calculation of the actual rear axle load TH tat:
Now enter the calculated actual rear axle load and the permissible rear axle load specified in the
tractor operating manual in the table under Point 11.4.
6. Tyre load capacity:
Enter the doubled value (two tyres) for the permissible tyre load capacity (see e.g. tyre manufacturer
documents) in the table under Point 11.4.
11.4 TABLE FOR THE WEIGHT RATIOS
Actual value
acc. to calculation
Permissible value
acc. to operating
manual
Double the
permissible tyre load
capacity
(2 tyres)
Minimum ballast
front/rear
kg
Total weight
kg
≤
kg
≤
kg
Front axle load
kg
≤
kg
≤
kg
Rear axle load
kg
≤
kg
≤
kg
CAUTION!
The minimum ballast must be attached to the tractor as a mounted implement or ballast weight!
The calculated values may not be higher than the permissible values!