APsystems ECU-3 V4 Installation/User Manual
31
Remote ECU Management (EMA)
ECU Configuration/ECU Status Page
The ECU SETTING page is your entry point into managing
ECUs remotely.
Figure 46
The ECU SETTING tab allows you to:
Set Time Zones
The ECU time zone can set or adjusted remotely through
the ECU setting tab. If the time zone is not properly set
the solar production data will not post properly on the
EMA site.
Load Inverter IDs
Once the ECU has been installed you can access the ECU
remotely to add the inverter IDs. Until the inverter IDs
are loaded, the ECU will not be able to collect data from
the inverters.
Update Inverter ID list
If an inverter(s) is added or swapped for a new unit, then
the ECU’s programmed list of inverters will need to be
updated.
