APsystems ECU-3 V4 Installation/User Manual
17
Local Network Interface
8.
Select “OK” on the IPv4 Properties window.
9.
Close the LAC Properties window.
10. Close the LAC Status window.
11. Close the Network and Sharing Center.
12. Using a standard web browser on your computer,
enter the lan IP address that is displayed on your ECU
in to the URL search field.
The ECU’s “splash” screen is displayed.
Figure 23
Using an Apple Mac
1.
Connect the computer to the ECU using a CAT5
network cable.
2.
Power up the ECU by connecting the power cable.
3.
Select the Apple icon in the menu bar to access
“System Preferences”.
4.
Select “Network” in the “Internet & Wireless” section
of the System Preferences.
5.
Select “Ethernet” on the left side of the Network window.
6.
Select “Manually” from the “Configure IPv4” drop
down menu.
7.
Enter the following in the appropriate fields:
IP Address: 192.168.131.1
Subnet Mask: 255.255.255.0
8.
Leave the “Router” field blank.
9.
Select “Apply”.
10. Using a standard web browser on your computer,
enter the lan IP address that is displayed on your ECU
in to the URL search field.
The ECU’s “splash” screen is displayed .
