APRILIA RSV 1000 R - 2003, Руководство пользователя

Страница: 104 / 160

use and maintenance RSV 1000 R - RSV 1000 RFACT
USA USA
104
◆
Hold the adjuster (6) with the appropriate
Allen wrench and tighten the lock nut (5), by
means of the appropriate Allen wrench, to
its appropriate tightening torque.
Lock nut (5) tightening torque: 28.93 ftlb
(40 Nm).
CAUTION
Adjust the spring preload and the
extension damping according to your
preference, and how the vehicle is used.
When the spring preload is increased, it is
necessary to also increase the extension
damping to avoid unsteady shock action.
If necessary, contact your Local
aprilia
Dealer.
CAUTION
Never loosen, or remove the screw
(7). This may cause nitrogen to escape
which will destroy the function of the
shock absorber and could upset the
handling of your vehicle, leading to an
accident with subsequent injury or even
death.
( ) Never loosen the screw
(8) or attempt to adjust the membrane
covered by it. This may cause nitrogen
t o e s c a p e w h i c h w i l l d e s t r o y t h e
function of the shock absorber and
c o u l d u p s e t t h e h a n d l i n g o f y o u r
vehicle, leading to an accident with
subsequent injury or even death.
WARNING
The competition adjustment must be used
in organized racing or circular course
competitive event, under the auspices of a
recognized sanctioning body or by permit
issued by the local governmental authority
having jurisdiction.
I t i s s t r i c t l y f o r b i d d e n t o u s e t h e
competition adjustment while riding the
vehicle on public streets, roads, or
highways.
(*) = clockwise (**) = counterclockwise
RSV R
RSV R
Rear suspension Standard setting Racing setting
Shock absorber distance
between centers (A)
313 ±1.5 mm 310 to 317 mm
Spring length (preloaded) (B)
149 mm
145 mm 151 mm
147 mm
Rebound damping, ring nut (1)
Tighten fully (*) and then
slacken (**)
by 20 click positions
Tighten fully (*) and then slacken (**):
by 12 - 16 click positions
by 13 - 16 click positions
Compression damping, screw (2)
for
or knob (2) for
Tighten fully (*) and then
slacken (**)
by 1.5 turns giri
by 12 click positions
Tighten fully (*) and then slacken (**)
by 1-2 turns
by 8-14 click positions
RSV R
RSV R
RSV R
RSV R
RSV R
RSV R