58
10.1.3 View the DVR-3011T video from a remote PC
Once Network View is executed a Login prompt will
appear, you must enter the default User Name: admin,
password: 9999 into the respective field and click on
OK to log into the application.
Follow the instructions below to use the Network
Viewer to browse a DVR-3011T video from a remote
location. Upon entering the Network Viewer, the
connection box will appear as follows.
1. Click
the
Find
tag to connection of the all DVR device in the LAN.
2. Choose a channel number from the Channel drop-down list.
3. Type in the user name:
admin
(it only accept user name as admin), and password: same as the
chosen DVR-3011T (4-digit no., which you set in the DVR unit).
4. Click
the
Modify
tag to check the data in the Device List.
5. Please repeat steps 2 to 4
again for another desire.
6. Click
the
Connect
tag to establish the connection between the devices and the computer. Click the
Login
tag to begin viewing images.
NOTE: Upon connection, the connection status box indicates the name and IP address of the selected
device. If there’s a failure to connect, a “Fail” message appears on the screen right after the
User Name; otherwise an “OK” appears. To add more connections or units to the DVR-3011T,
please repeat the above instructions.
Содержание DVR-3011ST
Страница 2: ......
Страница 54: ...52 9 Push the active handle inward 10 Lock the Key ...