Appro DVR-3011ST, Руководство по установке и эксплуатации

Страница: 41 / 88

39
5.4 COMMUNICATION
This option allows you to configure the status of the RS-232 communication port when connected to an
external device, and the Ethernet (FOR DVR-3011T ONLY) communications settings. (Please refer to the
RS-232 Protocol and Network Function for more details)
COMM ID:
Communication ID for RS232 and RS485 communication. After the DVR receives a RS232 or RS485
command, it checks if the <Dest ID> within the code is the same as the COMM ID, in which case the
particular command can be accept.
RS-232:
The RS-232 communication port can be either in an importing or exporting mode according to your
applications.
ON: Enables the RS-232 communication port. When you wish the unit to be controlled by an
external device, please select this entry for use.
OFF: Disables the RS-232 communication port.
RS-485:
The RS-485 communication port can be either in an importing or exporting mode according to your
applications.
ON: Enables the RS-485 communication port. When you wish the unit to be controlled by an
external device, please select this entry for use.
OFF: Disables the RS-485 communication port.
NET ENABLE: (FOR DVR-3011T ONLY)
This option selects either enable or disable for the Ethernet communication port.
OFF: Disables it.
ON: Enables it.
MAIN MENU
RECORD
ALARM / MOTION
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID
: 01
RS232 : ON
RS485 : ON
NET ENABLE : OFF (3011T)
NET DHCP : OFF (3011T)
NET IP : SET (3011T)
FTP SETTING (3011T)
MAIN PAGE
SET RS232 / RS485 ID