49
7. SATA Hard Disk Installation
The unit usually comes with one hard-disk drive installed in the compartment HD1, which is default-configured
as a master. If you need a second hard-disk drive to be installed in the compartment HD2. Please contact your
distributors or installers for specific instructions on how to install it. Serial ATA (SATA) interface disk drives are
designed for easy installation. It is not necessary to set any jumpers, terminators, or other settings on this drive
for proper operation. To install two hard-disk drives in the compartments for HD 1 and HD 2, please take the
following steps.
7.1 Built-in hard disk
1.
1. Unscrew all the mounting screws on the
mobile rack of the unit and detach it.
2.
3.
2. Carefully lift the mobile rack to a vertical
position.
3. Unscrew the secured screws to detach
the hard disk rack.
4.
5.
4. Carefully insert a SATA hard disk.
5. Place the hard disk in the rack.
6.
6. Secure the driver in the rack using two
mounting screws in both the
side-mounting holes. Please don’t
tighten the screws too much, as that
may damage the driver.
Содержание DVR-3011ST
Страница 2: ......
Страница 54: ...52 9 Push the active handle inward 10 Lock the Key ...