Installation and Service Manual – Carbon Filter
Page 4
Copyright © 2012 Applied Membranes, Inc. All Rights Reserved.
Design Basis & Specifications
Table 1 – Design Basis
Model No.*
Flow Rate**
(GPM)
Backwash
Flow**
(GPM)
Volume of Media
(ft
3
)
Resin Tank
(Dia”×H”)
Valve
Size
In/Out
Conn.
5gpm/ft
2
15gpm/ft
2
Carbon
(Only)
Total
(Incl.
Underbed)
W-G3072ET
24
74
55
12.5
16.5
30 × 72
2”
2”
W-G3672ET
35
106
75
17.0
22.0
30 × 72
2”
2”
*
Filters are available with USA or European style plugs and voltages.
W-G3072ET-US & W-G3672ET-US =
120V AC/60Hz with USA cord
W-G3072ET-EU & W-G3672ET-EU =
220V AC with European plug
(EU plug is removable to convert into universal 220v cord)
**
Backwash flow rate based on 25 psi pressure drop.
Specifications
Vessel rated at 150 psi max. operating pressure, 120°F max. operating temp.
All Systems Automatic
General Information and Safety
DISCLAIMER:
The information contained in this document is subject to change
without notice.
Applied Membranes, Inc. shall not be liable for technical or
editorial omissions made herein; nor for incidental or
consequential damages resulting from the furnishing,
performance, or use of this material.
READ THIS MANUAL:
Prior to operating or servicing this unit, this manual must be read
and understood. If anything is not clear, call for assistance before
proceeding. Keep this and other associated manuals for future
reference and for new operators or qualified service personnel.
USE PROPER POWER CONNECTIONS:
Use proper wiring and connection methods to satisfy local
electrical codes. SHOCK HAZARD: Connect this unit to a
properly grounded connection in accordance with the National
Electrical Code. DO NOT, under any circumstances, remove the
ground wire or ground prong from any power plug. Do not use
extension cords or an adapter without proper consideration.
SERVICE WARNING:
To prevent electrical shock, disconnect power to the system
prior to servicing.
WARNING:
Do not make any alteration or modification in the wiring or
plumbing of the system. This can result in damage to the
system and cause injury to operators or users.
WARNING:
Flush the system for at least 30 minutes before use to
remove all chemicals present.
CAUTION:
Never let the carbon filter freeze. Freezing can damage the
media tank.