ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT(S).
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
9
MODEL GCL300-A • THE MARKSMAN
WARNING! Read Usage Instructions & Warnings and Full-Body Fall Arrest Harness Usage Instructions & Warnings on pages 3-7 prior to the
use of this product! Failure to follow the instructions on pages 3-7 may result in serious injury or death!
THIS PRODUCT COMES FULLY ASSEMBLED; HOWEVER, IT IS ADVISABLE TO REFER TO THE DETAILED DIAGRAM BELOW TO BECOME FAMILIAR
WITH THE PROPER ASSEMBLY OF YOUR TREESTAND.
WARNING! AFTER BECOMING FAMILIAR WITH YOUR STANDS’ ASSEMBLY, YOU MUST READ AND FOLLOW ALL INSTALLATION
INSTRUCTIONS AND WARNINGS ON PAGES 13-17. FAILURE TO FOLLOW THIS WARNING MAY RESULT IN SERIOUS INJURY OR DEATH!
STEP 1.
Attach the fixed end of (1) climbing cable to the right support of the foot section using (1) 5/16'' x 1 1/4'' hex bolt, (2)
steel washers and (1) 5/16'' nylock nut. tighten securely. repeat this StEP for the seating platform.
STEP 2.
next, install (2) of the cinching straps to the outside of the foot section and the heel cord. See page 14.
Note:
A 3rd cinching strap is included to secure sections together during transport.
You are now ready to install your climbing treestand. refer to Pages 13-17,
Field Installation-Climbing
Treestands
, for installation instructions.
Min. Tree Diameter
9 Inches
Max. Tree Diameter
20 Inches
Max. Weight Capacity
(USER AND EQUIPMENT)
300 lbs/136 kg
Maximum Occupancy
one (1)
Parts List (GCL300-A)
Part #
Description
Qty
UP14-0408 Foot Section
1
UP14-0409 Foot Section Support-Left
1
UP14-0410 Foot Section Support-Right
1
UP14-0411 Seat Section
1
UP14-0412 Seat Section Support-Left
1
UP14-0413 Seat Section Support-Right
1
UP13-0130 Climbing Cable
2
UP14-0182 Heel Cord
1
UP11-0066 Connector Rope
1
UP11-0067 Accessory Bag
1
UP12-0146 Backpack Strap
2
UP11-0069 Cinching Strap
3
UP14-0414 Armrest Cover
2
UP11-0089 Armrest Foam
2
UP14-0415 Climbing Seat Cover
1
UP13-0133 Seat
1
UP14-0225 Ratchet Strap with D-ring
1
UP10-0037 Cam Buckle Strap
1
UP14-0207 Full Body Fall Arrest Harness B330
1
UP14-0418 Treestand Safety DVD
1
UP10-0660 Instruction Manual
1
UP77-0144 Spring Bolt
2
UP77-0036 5/16" x 1 1/4" Hex Bolt
2
UP77-0044 5/16" x 2 1/4" Hex Bolt
8
UP77-0031 Steel Washer
20
UP77-0030 Nylon Washer
16
UP77-0029 5/16" Nylock Nut
10
UP77-0143 Spring Bolt Retention Pin
2
Climbing
Cable
Spring
Bolt
Hole
Spring
Bolt
Retention
Pin
Seat Section
Climbing Cable
Climbing Cable
Bark Biters
Bark Biters
Foot Section
Spring Bolt
Spring Bolt
Seat Section
Support - Right
Seat Section
Support - Left
Foot Section
Support - Left
Foot Section
Support - Right
To adjust, remove
spring bolt retention
pin
from end of
Spring Bolt
. Pull Spring
Bolt back and adjust
Climbing Cable
.
Make sure
Spring Bolt
locks into a
hole in the Climbing Cable and replace
Spring Bolt Retention Pin
at the end of
the
Spring Bolt
.
