39
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Certificate:
70219727
Project:
80042317
Master Contract:
237484
Date Issued: 2020-11-24
DQD 507 Rev. 2019-04-30
© 2018 CSA Group. All rights reserved.
Page 2
The MPI series utilizes a configurator style model coding system as defined below:
Conditions of Certification:
1.
Under certain extreme circumstances, the non-metallic parts incorporated in the enclosure of this equipment
may generate an ignition-capable level of electrostatic charge. Therefore, the equipment shall not be installed
in a location where the external conditions are conducive to the build-up of electrostatic charge on such surfaces.
In addition, the equipment shall only be cleaned with a damp cloth.
2.
The enclosure is manufactured from Aluminum. In rare cases, ignition sources due to impact and friction sparks
could occur. This shall be considered during installation.
3.
IP 65 is not a part of the hazardous location ratings and is tested separately.
