43
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
IECEx Certificate
of Conformity
Certificate No.:
IECEx SIR 19.0026X
Date of issue:
2021-03-11
Page 2 of 4
Issue No: 1
Manufacturer:
Automation Products Group
1025 West 1700 North
Logan
Utah 84321
United States of America
Additional
manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended
STANDARDS
:
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2017
Edition:7.0
Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-1:2014-06
Edition:7.0
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-11:2011
Edition:6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC
60079-26:2014-10
Edition:3.0
Explosive atmospheres – Part 26: Equipment with Equipment Protection Level (EPL) Ga
This Certificate
does not
indicate compliance with safety and performance requirements
other than those expressly included in the Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Reports:
Quality Assessment Report:
GB/SIR/ExTR19.0088/00
GB/SIR/ExTR20.0215/00
NL/DEK/QAR13.0027/05
