APG MND, Руководство оператора

Страница: 27 / 31

Rev. A, 6/15
MND
27
Resetting the MND to factory defaults
Simultaneously press and hold the Decrease/Power button and Enter button for
approximately 5 seconds. This will bring up the 3 digit operating mode number. Change
the mode number to 125 and press the enter button. This will reset all parameter values
to the following factory defaults:
Parameter Value
Units Gallons
Auto-Off 65535 (disabled)
Decimal Place 0
Digit Mask Off
Digit Shift 0
Multiplier 1.000
Bar Graph 0 0
Bar Graph 100 10000
Over Load 99999 (max display value)
Battery Gauge Enable No Battery
Battery Full 13.5 V
Battery Low 11.0 V
Analog Low Reading 0
Analog High Reading 99999
Analog Low Calibration 0
Analog High Calibration 16383
T1 Type Off
T1 Reading 1000
T1 Window 500
T2 Type Off
T2 Reading 1000
T2 Window 500
Baud Rate 9600
Parity None
Stop Bits 1
C-Type Master
Sensor Address 1
Number of Sensors 1
Register Number 303
Function 4
Register Type U32 (unsigned 32-bit)
Scan Rate 000.5 seconds
Sensor Labels Sen 1 - Sen 11
Percent Full 00000 (disabled)
www. .com
information@itm.com 1.800.561.8187