APE Flex Boost, Руководство пользователя

Страница: 7 / 28

21
Over-Boost Safety
The Flex Boost has the abilityh to
configure one of the DC gauge inputs
for Over-Boost Safety. You must first
configure your Gauge settings and
then you can select that gauge in the
Over-Boost Safety drop down in the
settings tab. You can the set your
desired Over-Boost Safety level. In
this example, we are setting it at 16
PSI.
If the Flex Boost detects the Over-
Boost condition it will immediately
turn off the Flex Boost Solenoid and
display this message. In order to
turn your solenoid back on, the
Over-Boost condition must no
longer be valid and you must tab the
red message in the center of the
gauge.
6
What’s Included
Check to make sure you have all of the necessary components in your kit:
•
Flex Boost Module
•
Wiring Harness
• Flex Boost Solenoid and fittings
• Flex Fuel Sensor (optional)
•
Quick Connect Fuel Fittings and hose clamps
• 15” of 5/16” E85 compatible high pressure fuel line
• 4 fuel injection hose clamps
• Flex Fuel badge