APE Flex Boost, Руководство пользователя

Страница: 19 / 28

9
Flex Boost Solenoid Connections
F
LEX
B
OOST
1
2
3
Port 1: Brass Muffler
Port 2: Wastegate
Port 3: Manifold/Turbo Pressure
This configuration will give
the highest boost when the
duty cycle is over 90% and
the minimum boost will be set
by the wastegate spring.
Internal/Single Port Wastegate Connections
F
LEX
B
OOST
1
2
3
Port 1: Manifold/Turbo Pressure
Port 2: Top of Wastegate
Port 3: Brass Muffler
This configuration
will give the highest
boost when the duty
cycle is over
90%
and the minimum
boost will be set by
the wastegate spring.
External/Dual Port Wastegate Connections
18
Boost Controller Screen
The Boost Controller screen shows you both of the DC gauge inputs and
it shows you the current duty cycle being sent to the Flex Boost Solenoid.
Current value read
by Gauge 2 input.
It is 0.0 to 5.0 by
default, the scaling
information needs
to be entered in
the settings tab.
This mini gauge
can be turned off if
not used.
Current value read
by Gauge 1 input.
It is 0.0 to 5.0 by
default, the scaling
information needs
to be entered in
the settings tab.
This mini gauge
can be turned off if
not used.
It Tach Input is
enabled, the
current RPM is
displayed here
Boost Controller
Tab
Press this button
to go into the
Boost Profile edit
screen, you can
have up to four
profiles.
Current Flex Boost
Solenoid Duty
Cycle
Profile Select
buttons, if the
button is
highlighted then it
is the active
profile