APE Flex Boost, Руководство пользователя

Страница: 9 / 28

19
Boost Profile Editing
You can have up to four profiles, and they are completely customizable.
See description of all of the settings below. The Flex Boost allows the
user to set up the boost controller duty cycle for two different ethanol
settings. This is helpful as most vehicles can run higher boost levels on
E85 than gas. The upper limit will always be E85, and the lower limit
defaults to E10(Gas) or you can change this value to anything like E30 for
example. The E85 duty cycle always has to be equal or greater than the
lower ethanol rating duty cycle. The Flex Boost will vary the boost
controller duty cycle between these two points based on the ethanol
content in your vehicle. Setting the two values equal will fix the boost
controller duty cycle regardless of the ethanol rating.
You must tap the
save button to
preserve any
changes.
Takes you back to
the Boost
Controller screen.
Profile Select tabs,
the “+” will add a
new profile. You can name
your profile here.
Frequency the
solenoid will
toggle at.
You can set up
duty cycles for two
different Fuel
You can change
lower ethanol
limit value here
Lower ethanol
rating duty cycle
Upper ethanol
rating duty cycle
8
Installation
Flex Sensor Installation
The picture below is representative of the factory configuration of your
vehicle. You will have fuel lines that come from the gas tank and go
through a fuel filter before reaching the fuel rail that feeds the fuel
injectors. The factory ECU is connected to each individual fuel injector
through the factory wiring harness. There may
or may not be a return line.
1) Install Flex Fuel Sensor anywhere in the fuel lines. A good
place is at the fuel filter. Make sure the Flex Fuel Sensor
connector on the Flex Boost wiring harness is able to reach
the sensor.
3) Make sure to
secure the
sensor. Too
much vibration
will cause sensor
errors.
2) You can use the supplied fuel line adapters to connect the
Flex Fuel sensor to the fuel filter. If the adapters are the
wrong size, you can simply use the rubber fuel line and hose
clamps.