APE Flex Boost, Руководство пользователя

Страница: 24 / 28

23
Settings Screen
Display Name is what
is shown when Gauge
is in the Center.
Abbreviation is what is
used when Gauge is in
the corner.
Displays Module
Firmware and App
Version
Pass Key not used for
Flex Boost
Can Set the Glow
color around the
Gauges on main tab
A visible warning
range can be set for
each gauge here.
The Color ranges for
when this gauge is
selected for the
center can be defined
here.
Reset values
Hit the Save button
after any changes are
made
Can turn off Gauge
Display on dashboard
if not used
Changes Gauge Trim
from silver to black
How you enter the
values in the boxes
will be how the
numbers are
displayed on the
Gauges. For example,
of you put 7.35 and
29.4, the gauge will
display 2 decimal
points. If, however
you put 7.4 and 29.4
the gauge will only
display one decimal
point, and if you put 7
and 29 then the gauge
will not display a
decimal point. You
can also enter 0% and
100% if you want it
display the number as
a percentage.
Gauge scaling values
see below for
formatting rules.
Select DC Output.
This determines which
value is output on the
White wire.
E85 (E0 = 0V, E85=5V),
Gauge 1 or Gauge 2
Turn on Tach input
and set divider.
Select which DC gauge
to use for Over-Boost
safety and set the
level.
4
Introduction
The Alternative Performance Engineering Flex Boost is an advanced
electrnoic boost controller, ethanol gauge and generic Bluetooth gauge
all in one. Flex Boost combines all of the features of our Flex Boost
product with the addition of a programmable boost controller. Boost can
be configured based on Ethanol content or RPM and if you add a manifold
pressure sensor you can configure an Over-Boost Fail safe. The Flex Boost
also has two generic 5V sensor inputs that can be used for additional
sensors like a wideband or map sensor. All of this data can be monitored
and data-logged wirelessly via Bluetooth Low Energy on our Android or
iOS application.
The Flex Boost provides a raw ethanol sensor output with built in 10K
pullup resistor to 5V that can be sent to external ECU. There is also a 0V-
5V DC Output signal that can be configured to send out either one of the
two 5V generic gauge inputs or can be configured to send the E85 content
out as a DC voltage.
• Simple plug and play installation
• Bluetooth phone application available for iOS and Android.
• Boost Controller functionality is configurable via Bluetooth
•
Can configure 4 separate profiles with custom frequency and duty cycle
• Has Flex Boost mode that allows the boost controller setting to change automatically
based on ethanol content
• Has a tach input that can be used to configure boost settings by RPM
•
Has an Over-Boost Safety feature that allows you to use one of the 5V sensor such as a
wideband or boost inputs to monitor boost and will automatically kill the boost
controller if the over-boost condition is met.
• Monitors Ethanol Content and Fuel Temperature
• Has two generic 5V inputs that can be used to convert any linear 5V sensor such as
wideband or boost to a Bluetooth gauge.
•
Gauge format is completely user configurable
• Has built in Fuel Calculator to figure out desired E85 to gas mix ratios when filling at
the pump
• Has a raw ethanol sensor output with integrated pull-up resistor that can be sent to
stand alone ECUs
• Has a DC 5V output that can be configured to send out Ethanol Level or the value of
one of the two 5V sensors.
• Has data logging function