AP Expert VT-110, Руководство пользователя

Страница: 77 / 84

20
Expert VT110+
Topics Covered in this Chapter
▪ Expert VT110+
Expert VT110+
The Expert VT-110+ is based on the Expert VT-110 with the following exceptions:
• The 0-10V outputs can be used as two additional independent ventilation variables with the same
logic and user interface as the TRIAC Variables.
• No hourly history is displayed in the controller but it is still available from the transfer menu.
How to use the 0 – 10V output as a variable:
1. In the Installation menu, set the mode of the 0–10V to Var .
2. A new option Out X Min Spd % will be available just below its output mode.
• Out X Min Spd % is the Minimum fan speed of the 0–10V output for stages 2 and above. (This
speed does not apply to the minimum ventilation cycles.)
• The Range of the Out X Min Spd % parameter is from 0–100% which corresponds to 0–10
VDC at the output. It is 20% by default (2VDC).
• The 0–10V output signal can be configured as 0–10V or 10–0V.
3. For everything else, the 0 – 10V output in Var mode has the same logic and user interface as the
TRIAC variables.
890-00081 Expert VT-110 77