aoyue INT866, Инструкция по эксплуатации

Страница: 10 / 20

10
OPERATING GUIDELINES
C. HOT AIR GUN
1. Follow the initial procedures above, “A. INITIAL PROCEDURES”.
2. Adjust Hot Air Gun Airflow Adjustment to the middle position.
3. Activate “Hot Air Gun” switch (“9” from the control panel).
4. The system will immediately start to blow air at a medium airflow while
rapidly and safely increasing the air temperature to 100°C (default
system operating parameters). These values will be reflected from the
Hot Air Gun Air Temperature display panels, “1” from the control panel,
respectively.
5. Adjust to desired air flow.
6. Adjust the hot air gun temperature using the HOT AIR GUN
TEMPERATURE ADJUSTMENT BUTTONS (“4” from the control panel).
The prefix of the display for Hot Air Gun Temperature will change from
“H” to “h” indicating that air temperature is being adjusted. It will return
to “H” (indicating actual temperature) while the temperature is
gradually increasing or decreasing until the desired temperature is
reached.
7. Reworking task can be started 1 minute after the desired hot air
temperature and airflow level are reached, as also indicated from
display panel “1”.
8. When reworking is complete, return the Hot Air Gun to its holder and
DO NOT immediately turn off the main power switch.
IMPORTANT:
When adjusting the air temperature, it is strongly
advised to initially increase the airflow level in order to manage
the system temperature. This is to protect the heating element
inside the handle from excessive heat and avoid the possibility of
subjecting adjacent components to thermal shock.