aoyue INT866, Инструкция по эксплуатации

Страница: 9 / 20

9
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface and all
the heat-generating components placed on their respective holders
or stands.
2. Ensure all function switches are OFF prior to reworking.
3. Ensure all terminal connections are properly secured.
IMPORTANT
: Please refer to the CONTROL PANEL GUIDE
page for buttons and display panel directory.
OPERATING GUIDELINES
A. INITIAL PROCEDURES
1. Plug the device to the main power source using the power cord
provided in the package.
2. With all function switches deactivated and all terminal connections
properly secured, switch ON the device by activating the main power
switch located at the back of the unit.
3. The display panels, will temporarily show the product name in a
scrolling manner and then display “OFF” on all rows once the scroll is
finished (see below illustration). The system will remain at this state
until the user activates a function.
B. CELCIUS TO FAHRENHEIT SWITCHING
1. Plug the device to the main power source using the power cord
provided in the package.
2. Press and hold the solder iron UP button while turning on the system
power to set system to Centigrade mode. The display will show “Aoyue
866C” with the last character indicating the type of temperature scale
used. “C” Centigrade, “F” Fahrenheit.
3. Press and hold the solder iron DOWN button while turning on the
system power to set system to Fahrenheit mode. The display will show
“Aoyue 866F” with the last character Indicating the type of temperature
scale used. “C” Centigrade, “F” Fahrenheit.