aoyue INT866, Инструкция по эксплуатации

Страница: 14 / 20

14
SOLDERING IRON AUTO-SLEEP MODE
The soldering iron’s SLEEP mode is deactivated by default. Follow the
set of procedures below to activate this feature.
CONDITION: SOLDERING IRON function is inactive.
1. While soldering iron is displaying “OFF” or in stand-by mode, push
both UP and DOWN buttons of the SOLDERING IRON TEMPERATURE
adjustment buttons (“6” from the CONTROL PANEL GUIDE page).
2. Wait until “t0FF” appears from soldering iron temperature display
panel. This means sleep mode is currently turned OFF.
3. Release the two buttons after the change in display.
4. Use the same two buttons to adjust the countdown time. “t001”
means solder iron will go to sleep in 1 minute. Timer is adjustable from
1 to 60minutes.
5. Confirm the change by activating the SOLDERING IRON switch.
6. To DEACTIVATE this feature, simply follow the above procedures.
This time, select “tOFF” .
7. During sleep mode, the soldering iron temperature display panel will
show an all-dash, “
- - - -
” .
8. To wake the soldering iron from sleep mode, press the soldering iron
temperature adjustment buttons.
AUTO SLEEP FUNCTIONS