87
M
M
X
X
3
3
6
6
/
/
M
M
X
X
3
3
6
6
L
L
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
AW
A
R
D
BI
OS
S
e
tu
p
Standard CMOS Setup > IDE Primary Master/Slave & IDE Secondary
Master/Slave
IDE Primary &
Slave Master/
Slave
Auto (Default)
Manual
None
If you select “Manual”, you need to fill in all remaining field, such as
Access Mode, Capacity, Cylinder, Head, Precomp, Landing Zone and
Sector on this selected item. If the item “Auto” is selected, only “Access
Mode” can be set, the others will remain “0”. And when the system boot
up, system will detect the hard disk and configure it automatically. “None”
means there is no device in the channel.
Standard CMOS Setup > IDE Primary Master/Slave & IDE Secondary
Master/Slave > Access Mode
Mode
Auto (Default)
CHS
LBA
Large
The enhanced IDE feature allows the system to use a hard disk with a
capacity of more than 528MB. This is made possible through the Logical
Block Address (LBA) mode translation. The LBA is now considered a
standard feature of current IDE hard disk on the market because of its
capability to support capacity larger than 528MB. Note that if a HDD is
formatted with LBA On, it will not be able to boot with LBA Off.
Tip:
For an IDE hard disk, we recommend that you use the
"Auto"
to enter the drive specifications automatically
