OFF--> Tilt Normal move.(
Default
)
ON-->
Reverse Tilt move.
◆
P/T Rectify: Disable or enable position rectify function.
OFF--> Disable P/T rectify
ON--> Enable P/T rectify
-(
Default
)
◆
Pan Offset:
Set PAN original position.
Default: 10
◆
Tilt Offset:
Set TILT original position.
Default: 10
◆
Lamp when:
PowerON--> Turn on the lamp when power on.
(
Default
)
RstDone--> Turn on the lamp after reset.
Manual--> Manually turn on the lamp.
◆
Data hold:
OFF--> When no DMX signal,return to middle position.
(
Default
)
ON--> When no DMX signal,stop in the final position.
◆
Factory Setting:
Restore all parameter to factory setting.
2.3.6 STAT-->Status: View status
Enter the page as shown in Figure 12:
Figure 12 page of status
◆
Work Mode:
Show the current working mode.
◆
Address:
Show the current address.
◆
Version:
Show the version of the lamp.
◆
Elapse:
Working hours after turn on.
◆
Tatol:
Cumulative hours of operation
Common faults and use attention
1.
Common fault handling
The lamp contains professional components such as microcomputer circuit board and
high-voltage power supply. For your safety and product life, non-professionals should not
disassemble the lamp and related accessories without authorization.
When <Data hold> set <ON>,click to
clear DMX data, and make the lamp
return to themiddle position.
Click to reset.
