Anzzi SD-AZFL06001 Series, Инструкция по установке и эксплуатации

Страница: 10 / 16

Step 3
1. Replace the Wall Jamb[03]. Tighten the
screws by the allen key.
Step 4
1. Position the Bottom Rail [06] on the floor,
perpendicular to the Wall Jamb[03]. Both Wall
Jamb[03] and Bottom Rail [06] have a 45
°
angle
to ensure a perfect connection. Make sure their
edges match. Measure the distance from each
end of Bottom Rail [06] to the back wall to be
sure the bottom rail is straight. They should be
the same.
2.Using a pencil, mark location of all four screw
holes for Bottom Rail [06] (Fig 4).
Fig 3
3
Fig4
8