Anzzi SD-AZFL06001 Series, Инструкция по установке и эксплуатации

Страница: 3 / 16

1
INSTALLATION GUIDE
• Please check the product for transit damage, missing parts immediately. Damage reported
later cannot be accepted. Please handle the product with care. Avoiding any impact on all sides
and edges of the glass.
• Consult your local plumbing codes prior to installation.
• To reduce the risk of breakage, keep corner protectors on glass while installing.
• If this unit is going to be installed in a new construction, please install all of the required
plumbing and drainage before installing the shower. Use a competent and licensed (if required
by local code) plumber for all plumbing installation.
• Please make sure that prior to beginning the installation, the surfaces are leveled and solid
and will be able to support the total weight of the unit. Also make sure the walls are at right angles.
Irregular installation surface level, radius corners or improper angle of side walls will result in
serious problems for your installation. Please note that some adjustments and drilling might be
necessary during the installation process.
• Please protect all primary surfaces of the product during installation. Never set your glass
down directly onto a tile floor. Leave corner protectors in place until necessary to remove them.
Always use a piece of wood or cardboard to protect the bottom edge and corners ofthe glass
prior to and during installation.
LL
WARNING
• Special care should be taken to avoid hidden pipes or electrical cables when drilling holes
on walls .
• This product is heavy and may require two people to install.
• When cutting or drilling metal components or when handling glass, to reduce the risk of
personal injury, protective eye wear, gloves, and closed-toe shoes are required.
• Failure to install this product according to installation instructions may result in personal
injury, property damage, or product failure, and may void the warranty.