Anzzi SD-AZFL06001 Series, Инструкция по установке и эксплуатации

Страница: 15 / 16

Care & Maintenance
GLASS: To ensure long lasting life for your glass shower products:
wipe them off after each use with a soft cloth. Rinse and wipe off the
glass using either a soft cloth or a squeegee to prevent soap buildup
and water spots (Hard water can etch the surface of the glass over
time if left to dry). To prevent scratching the surface: never use
abrasive cleaners or cleaning products that contain scouring agents.
Never use bristle brushes or abrasive sponges that may scratch the
surface.
HARDWARE: To ensure a long lasting finish: wipe off the metal parts
after each use with a soft cloth. Do not use abrasive cleaners or
cleaning products containing ammonia, bleach or acid. If accidentally
used, rinse the surface as soon as possible to prevent damage to the
finish (peeling or corrosion). After cleaning the polished finishes,
rinse thoroughly and wipe dry with soft cloth. Clean stainless steel
surfaces at least once a week. When applying stainless steel cleaner
or polish to stainless steel hardware, work with (not across) the grain.
Never use an abrasive sponge or cloth, steel wool or wired brush as
these may permanently scratch the surfaces.
NOTE: To maximize the life of your door, it is important to regularly
inspect the glass and all hardware for misalignment, proper
attachment, and/or damage. Contact ANZZI with any questions
or concerns.
13