background image

DTC INST 145 issue 2 – 16.11.07 

Please retain this document for future use and 

reference. 

 

DLT TSM106 

INSTALLATION AND MAINTENANCE 

 

    

Guarantee 

 

Your product comes with a 5 year guarantee; this includes  
2 years parts and labour, with the following 3 years parts only, proof of 
purchase will be required. 
 
This guarantee is invalid if the product is misused, incorrectly installed, 
maintained or cleaned. 
 
Installation  
 
Installations should be carried out by a competent installer, who must 
after completion, check for leaks, from both the product and pipe work. 
 
All installations must be carried out in compliance with Water Bye Law 
Regulations, for further details contact your Local Water Authority. 
 
The product must be installed and used in such a way as not to cause 
water damage, therefore water from the product must be suitably 
directed and/or retained. 
 
Cleaning 
 
This product should be maintained using a clean damp cloth, do not use 
abrasive agents or materials on the product surface. 
 
For technical, installation, servicing advice and/or spare parts please 
call: 
 

CUSTOMER CARE LINE 

0800 1951602 

 

Deva reserves the right to change or improve the products described in any of its 

publications 

 

Summary of Contents for DLT TSM106






Reviews: