27
26
How to charge the terminal battery
Example of Base power supply
Example of connecting base power
supply to the base socket
Connect the
power supply
to the base
socket here
2.
1.
Place the base on a clear, flat surface near the mains power outlet and a telephone socket
if dial-up communication is required. Follow the below instructions to connect your
terminal to the base.
A.
Connect the power supply (number 1) to the base socket as shown above.
B
. Connect the base power supply (number 2) to the main power outlet on the wall.
C.
Place the terminal on the base by securely connecting the terminal to the docking
connector on the base.
D.
Check the “plug symbol ” shown on the upper right hand side of the terminal
screen indicates that the terminal is connected into the power outlet.
E
. Check the battery symbol on the terminal screen that is flashing or moving on the
terminal screen indicates that charging is in progress.
NOTE:
It is your responsibility to keep your terminal away from any external heat source (radiator,
sun, enclosed area and etc.) which can have an impact on the terminal battery lifetime and
performance.
9.7 Communication Mode
The ANZ POS Mobile Plus terminal’s base communicates to ANZ’s network via the Internet
Provider that your Point of Sale System is connected to. The terminal itself communicates
to its base via Bluetooth.