38
CREDIT ACCOUNT
The selected account is displayed.
$10.00 KEY PIN
Have the cardholder enter their PIN then
press ENTER.
TRANSACTION
APPROVED
If the transaction is approved, the Point of Sale
system will print a customer Transaction Record.
Please check for approval of the transaction before
completing the refund. Hand the customer their copy
of the Transaction Record and their card. If rejected,
the terminal will display an error message outlining
the reason (please refer to section 17). Notify the
customer and advise them to contact their Card Issuer.
Signature Authorisation
The preferred method of card payment authorisation in Australia is PIN. However, in
certain circumstances the terminal will prompt for a signature. In these cases, the terminal
will display the following screens:
$10.00 KEY PIN
Press ENTER here to bypass PIN for a signature.
NOTE:
Only some cards will allow the terminal to bypass
PIN. If only PIN is accepted, then the terminal will beep and
this screen will remain until a PIN is entered.
PROCESSING
PLEASE WAIT
Terminal status is displayed.
SIGNATURE
REQUIRED
The POS system prints a signature record.
Have the
customer sign this and compare it to the signature on
the reverse of the customer’s card.
SIGNATURE
VERIFIED?
For a Magnetic Stripe transaction, this screen will be
displayed. If the signatures match, select YES on your
Point of Sale system. If they do not, select NO to
decline the transaction.
REMOVE CARD
SIGNATURE
VERIFIED?
For a Chip Card transaction, this screen will be
prompted to and please remove the card from the
terminal. If the signatures match, select YES on your
Point of Sale system. If they don’t match, select NO to
decline the transaction.