Anywire ASLINKER BL2LN87SB-02D CC20 Series, Руководство по продукту системы

Страница: 13 / 20

-BL2LN87SB02D*CC20 13/20-
0
1
2
3
0
1
0
1
0
1
2
3
This parameter is used to check power supply line information when disconnection is detected.
Variable Description
Normal
Disconnection of IN0 only
Disconnection of IN1 only
Disconnection of both IN0 and IN1
■
Power supply line disconnection information
[Equipment parameter 3]
*
For read only
Factory setting: 0
This parameter is used to check signal line information when disconnection is detected.
This parameter is used to clear a signal line disconnection error.
*
The signal line disconnection clear command is active only when the error signal is turned from OFF to ON.
This parameter is used to clear a short-circuit error when short-circuit notification cancel setting (equipment parameter 12) is
“manual restoration.”
*
After execution of the short-circuit notification cancel command, set this parameter to OFF.
Otherwise, operation of the short-circuit notification cancel setting (equipment parameter 12) is the same as that of the
automatic restoration setting.
Variable Description
Normal
Disconnection of IN0 only
Disconnection of IN1 only
Disconnection of both IN0 and IN1
■
Signal line disconnection information
[Equipment parameter 4] *
For read only
Factory setting: 0
Variable Description
Clear command OFF
Clear command ON
Variable Description
Cancel command OFF
Cancel command ON
Factory setting: 0
■
Signal line disconnection clear command
[Equipment parameter 6]
*
When power is supplied, this unit will always start with the “0” setting.
*
When power is supplied, this unit will always start with the “0” setting.
■
Short-circuit notification cancel command
[Equipment parameter 14]
Factory setting: 0